1～8 item / All 8 items
● Snow melting can be achieved using far infrared rays, allowing for snow removal. ● Very small-scale spot snow melting is also possible.
- High-efficiency carbon filaments are used in the heating element. - Infrared rays that are easily absorbed by snow are emitted from the carbon filaments.
For snow accumulation and freezing prevention! It can be installed in a short period without road construction.
The "UMS-6000" is an infrared snow melting device suitable for 6kW type road surface snow melting. Since it is a snow melting system that radiates far infrared rays from above, there is no need for road construction, and it can be easily installed. The far infrared rays emitted from the snow melting device are not affected by air or temperature and reach the snow and ice directly. Far infrared rays (especially those with wavelengths of 3μm to 10μm) are easily absorbed by water, causing the water molecules and crystals in the snow and ice to vibrate (resonate), leading to melting. 【Specifications (partial)】 ■ Rated voltage: AC200V (single phase) ■ Rated frequency: 50/60Hz ■ Rated power consumption: 6000W ■ Heater: Far infrared carbon heater ■ Usage location: Outdoor *For more details, please refer to the PDF document or feel free to contact us.
Easy setup! Prevents disruptions to ETC lane equipment caused by snowfall.
The "UMS-1000" is a 1KW type far-infrared snow melting device. It efficiently melts snow at low cost using far-infrared rays. The far-infrared rays emitted from the snow melting device are unaffected by air or temperature and reach the ice and snow directly. Far-infrared rays are easily absorbed by water, causing the water molecules and crystals in snow and ice to vibrate (resonate), leading to melting. To prevent system failures due to freezing and other issues caused by snow accumulation on vehicle detectors in ETC lanes, installing this product helps prevent snow accumulation and freezing, contributing to smooth traffic flow. 【Purpose of ETC Lane Installation】 ■ Improvement of obstacles ■ Ensuring safe driving ■ Securing profits ■ Providing at low cost *For more details, please refer to the PDF materials or feel free to contact us.
![[Logistics Efficiency] Automatic snow melting machine that melts from high places! *Case study collection gift!](https://image.www.ipros.com/public/product/image/8a3/2000132994/IPROS10434358808672544298.jpeg?w=280&h=280)
Prevent a decrease in work efficiency due to snow! For snow and ice prevention in truck yards where large vehicles enter and exit, and in front of warehouses where forklifts operate. Construction can be completed in as little as one day.
The "Tokerumo" is an infrared radiation snow melting device. It melts snow using the power of infrared rays emitted from above, similar to sunlight. 【Functional and Economical】 With automatic operation using a snowfall sensor (temperature and snowfall detection), it achieves excellent snow melting efficiency by melting snow before it accumulates. 【Easy Installation】 There is no need for roadbed or piping work, making installation during winter easy. It can be set up in as little as one day without obstructing traffic. Here’s where it shines! ♦ Winter Safety Measures and Fall Prevention ♦ Winter falls are said to often result in serious injuries such as fractures. By installing it in high-traffic areas like store and building entrances, it prevents the formation of slippery surfaces due to compacted snow. ♦ Labor Saving and Workforce Preservation ♦ With automatic operation using a snowfall sensor, it prevents accumulating snow. This allows you to focus on your work without diverting valuable manpower to snow shoveling. ♦ Preventing Outdoor Equipment Failures ♦ It prevents troubles caused by snow on outdoor equipment such as air conditioning outdoor units and security cameras. By melting snow simultaneously with snowfall, it continuously protects important equipment from snow and ice. *For more details about the product, please refer to the materials. Feel free to contact us with any inquiries.
To interchanges and smart interchanges! Efficient and low-cost snow melting with far-infrared rays.
The "UMS-280" is an easy-to-install far-infrared snow melting device suitable for preventing malfunctions. It is designed to prevent malfunctions and freezing of various vehicle detection devices due to snow accumulation, attached snow, and freezing. By installing it at interchanges and smart interchanges, it helps reduce accidents caused by malfunctions of ETC lane equipment and various devices, contributing to smooth driving and safety. 【Installation Objectives】 ■ Prevention of malfunctions ■ Ensuring safe driving ■ Securing profits ■ Providing at low cost ■ Melting snow around vehicle detection devices (including base and foundation areas) *For more details, please refer to the PDF materials or feel free to contact us.
For cost reduction! Snow melting through autonomous driving is possible, preventing the premature shutdown of ETC equipment.
The "UMS-4000" is a 4kW type far-infrared snow melting device effective for tunnel snow and road surface melting. Since road construction is not required, it can be installed in a short period of time. Unlike road heating systems, it does not require idling to constantly warm the base, which helps reduce running costs. The far-infrared rays emitted from the snow melting device are not affected by air or temperature and reach the snow and ice directly. 【Features】 ■ Easy installation ■ Cost reduction ■ Short installation period *For more details, please refer to the PDF materials or feel free to contact us.
For ensuring safety! It is very effective as a snow prevention measure at tunnel entrances.
The "UMS-2000" is a 2KW type infrared snow melting device for tunnels and road surfaces. It enables snow melting through automatic operation, preventing the operational stoppage of ETC equipment in advance, making it particularly effective for smart interchanges where no personnel are stationed. Additionally, it can be easily installed without the need for road surface construction, making it a very effective snow melting system for countermeasures against snow brought into tunnel entrances. 【Specifications (partial)】 ■ Rated Voltage: AC200V (single phase) ■ Rated Frequency: 50/60Hz ■ Rated Power Consumption: 2000W ■ Heater: Far infrared carbon heater ■ Usage Location: Outdoor *For more details, please refer to the PDF materials or feel free to contact us.
Immediate effects on winter safety measures and improvement of the work environment! Prevents snow accumulation and freezing. Construction can be completed in as little as one day.
"Tokelu Mo" is a snow melting device that uses the power of far-infrared rays emitted from above to melt snow. It efficiently melts snow through automatic operation with a snowfall sensor, preventing accumulated snow. This contributes to improving the working environment and alleviating labor shortages. It also features the ability to be installed in as little as one day without the need for roadbed or piping work. 【Features】 ■ Spot irradiation snow melting solves problems "precisely" ■ 24-hour automatic operation reduces labor required for snow removal ■ Supports securing winter evacuation routes and disaster prevention measures Here’s where it is active! ♦ Winter safety measures and slip prevention ♦ Winter slip accidents are said to often lead to serious injuries such as fractures. By installing it in places with heavy foot traffic, such as store and building entrances, it prevents the formation of slippery surfaces caused by compacted snow. ♦ Labor-saving and workforce securing ♦ With automatic operation using a snowfall sensor, it prevents accumulating snow. This allows valuable manpower to focus on business without being diverted to snow shoveling. ♦ Prevents outdoor equipment failures ♦ It prevents troubles caused by snow for outdoor equipment such as air conditioning outdoor units and security cameras. By melting snow simultaneously with snowfall, it continuously protects important equipment from snow and ice.
